Oregon · Hiking

Mt. Howard summit loop

Mt. Howard summit loopPhoto: ilya_ktsn, CC BY 2.0 (via Flickr)
1.2 mi
loop
471 ft
climb
8,212 ft
high point
Loop
route
Loading this week's forecast

Is Mt. Howard summit loop open right now?

Closure in the area

There's a closure order in Wallowa-Whitman National Forest. It doesn't name Mt. Howard summit loop, so check the source for the area it covers.

As of · Source: USFS · Wallowa-Whitman National Forest. Agencies don't list every closure — check before you go.

Mt. Howard summit loop is a short, easy loop hike in the Eagle Cap Ranger District of the Wallowa-Whitman National Forest in northeastern Oregon, managed by the Forest Service. The route is about 1.2 miles long, with a total climb of 471 feet and a high point of 8,212 feet. It starts at roughly 8,123 feet and ends at a similar elevation, so the whole trip is a balanced loop with about equal gain and loss. The trail is rolling, and the steepest stretch comes at about 0.6 miles in, where the grade reaches 12 percent. It pairs easily with other outings in the area. The High Wallowa-East Peak Trail begins just 0.1 mile away, and the Royal Purple Mine Trail is about a mile off. Farther out, the West Fork Wallowa River offers canoeing about 5 miles away, and Hurricane Creek Campground sits about 7.6 miles from the loop.

Conditions and forecast on Mount Howard

Daily highs and lows, wind and the chance of precipitation at the summit and route start for the next 7 days, from the Open-Meteo model.

Route details

Distance
1.2 mi
Climbing
About 471 ft
Summit
8,245 ft
Difficulty
Easy
Time
About 0.5 hours

Questions about this route

How long is the Mt. Howard summit loop on Mount Howard?

About 1.2 mi.

How much elevation gain is on the Mt. Howard summit loop?

About 471 ft of climbing round trip.

How hard is the Mt. Howard summit loop?

It is rated easy.

How long does the Mt. Howard summit loop take?

About 0.5 hours round trip.

Map and trail data © OpenStreetMap contributors