Tennessee · Hiking

Pines Loop

0.9 mi
loop
304 ft
climb
1,976 ft
high point
Loop
route
Apr, Aug–Nov
best months
Loading this week's forecast

Is Pines Loop open right now?

Closure in the area

There's a closure order in Cherokee National Forest. It doesn't name Pines Loop, so check the source for the area it covers (2 listed).

As of · Source: USFS · Cherokee National Forest. Agencies don't list every closure — check before you go.

Pines Loop is a 0.9-mile loop hike in Tennessee, starting on city land within the City of Elizabethton. The route runs through the Watauga Ranger District of the Cherokee National Forest, and the nearest town is Hampton, about 0.3 miles away. The loop is easy and short, with a total elevation gain and loss of about 304 feet. It starts at roughly 1,800 feet and reaches a high point of about 1,976 feet, with the steepest stretch around the 0.5-mile mark. The climb is rolling, and the entire trip takes about half an hour. Spring and fall are the most comfortable times to go. Typical averages from a nearby weather station in Elizabethton show October highs around 70°F with lows near 44°F, and May highs around 77°F. That station sits roughly 500 feet lower than the loop's high point, so temperatures on the trail run cooler. Other outings close by include the River Loop, about 0.3 miles away, and the Hampton Blueline Trail, about 1.3 miles off. The Appalachian Trail passes within about 2 miles, and the Little Doe River offers canoeing about 2.1 miles away.

Local outfitters

Not on Roamze yet. Their page has how to reach them.

Map and trail data © OpenStreetMap contributors