Ohio · Hiking

Wolcot Trail

Wolcot TrailPhoto: Wayne National Forest, Public Domain Mark (via Flickr)
3.1 mi
round trip
1,257 ft
climb
1,042 ft
high point
Out and back
route
Mar–Apr, Jun
best months
Loading this week's forecast

Is Wolcot Trail open right now?

Closure in the area

There's a closure order in Wayne National Forest. It doesn't name Wolcot Trail, so check the source for the area it covers.

As of · Source: USFS · Wayne National Forest. Agencies don't list every closure — check before you go.

Wolcot Trail is a moderate out-and-back hike in the Ironton Ranger District of Wayne National Forest in Ohio, managed by the Forest Service. The trail is about 6 miles long, with a total elevation gain of roughly 1,250 feet, and it reaches a high point of about 1,040 feet. The climb is steady, and the steepest stretch comes early, around 0.6 miles from the start, where the grade reaches about 19%. The most comfortable months for a visit are typically late spring and early fall. Typical averages from a nearby weather station in Portsmouth-Sciotoville show May highs around 76°F and September highs around 80°F, with October cooling to about 69°F. That station sits about 500 feet lower than the trail's high point, so temperatures on the trail run a little cooler. The hike takes about 2.5 hours. Pine Creek, a canoeing spot, is less than a mile away, and the Telegraph Trail and Lyra Trail are both about 1.7 miles off. For an overnight stay, Two Points Group Area is about 9 miles away.

Map and trail data © OpenStreetMap contributors