California · Hiking

Summit Loop Trail

Summit Loop TrailPhoto: mliu92, CC BY-SA 2.0 (via Flickr)
3.2 mi
loop
1,184 ft
climb
1,207 ft
high point
Loop
route
Jan–Dec
best months
Loading this week's forecast

Summit Loop Trail is a moderate, 3.2-mile loop in San Bruno Mountain State and County Park, California, on county land. The trail rises about 1,200 feet from a starting elevation of 622 feet to a high point of 1,207 feet, with the steepest stretch at about 1.7 miles in, where the grade reaches 17 percent. Late summer and early fall are the most comfortable times to go. Typical averages from a nearby weather station in Pacifica show August and September highs around 71 to 72°F with only one or two wet days a month, while winter brings highs near 60°F and about 10 to 11 wet days a month. That station sits well below the trail, so temperatures on the higher parts of the route run cooler. The Ridge Trail and Dairy Ravine Trail both lie about half a mile away, and the Saddle Loop Trail is under a mile off. Climbers can head to Glen Canyon, roughly 3.6 miles away.

Local outfitters

Not on Roamze yet. Their page has how to reach them.

Conditions and forecast on San Bruno Mountain

Daily highs and lows, wind and the chance of precipitation at the summit and route start for the next 7 days, from the Open-Meteo model.

Route details

Distance
3.2 mi
Climbing
About 1,184 ft
Summit
1,310 ft
Difficulty
Moderate
Time
About 1.5 hours

Other routes up San Bruno Mountain

Questions about this route

How long is the Summit Loop Trail on San Bruno Mountain?

About 3.2 mi.

How much elevation gain is on the Summit Loop Trail?

About 1,184 ft of climbing round trip.

How hard is the Summit Loop Trail?

It is rated moderate.

How long does the Summit Loop Trail take?

About 1.5 hours round trip.

How many routes go up San Bruno Mountain?

2: Ridge Trail and Summit Loop Trail.

Map and trail data © OpenStreetMap contributors