Washington · Hiking

Albert Camp Trail

Albert Camp TrailPhoto: Nwcamera1, CC BY-SA 4.0 (via Wikimedia Commons)
5.8 mi
round trip
3,118 ft
climb
7,677 ft
high point
Out and back
route
Loading this week's forecast

Is Albert Camp Trail open right now?

Closure in the area

There's a closure order in Colville National Forest. It doesn't name Albert Camp Trail, so check the source for the area it covers.

As of · Source: USFS · Colville National Forest. Agencies don't list every closure — check before you go.

Albert Camp Trail is a hard out-and-back hike in the Pasayten Wilderness, part of the Tonasket Ranger District of Colville National Forest in north-central Washington. The trail is managed by the Forest Service and lies within designated wilderness, so it is a backcountry route rather than a developed one. The route is 11.5 miles long, with a total elevation gain of 3,118 feet. The high point is 7,677 feet, and the low point is 5,722 feet. The climb is steady, and the steepest stretch comes at about 4.8 miles, where the grade reaches 27 percent. The trail starts at 7,198 feet, and the round trip ends at the same elevation. The trip takes about 5.5 hours. The Boundary Trail begins just 0.1 mile away, and the Smith Lake Trail is about 1.4 miles off. The Pasayten Wilderness climbing area is roughly 2.9 miles away, and the Chewuch River offers paddling about 9.8 miles from the trail.

Map and trail data © OpenStreetMap contributors