Oregon · Hiking

Indian Canyon Loop Trail

Indian Canyon Loop TrailPhoto: daveynin, CC BY 2.0 (via Flickr)
1.5 mi
round trip
566 ft
climb
1,949 ft
high point
Out and back
route
May–Oct
best months
Loading this week's forecast

Is Indian Canyon Loop Trail open right now?

No closures listed

The National Park Service lists no closures for John Day Fossil Beds National Monument.

As of · Source: NPS · John Day Fossil Beds National Monument. Agencies don't list every closure — check before you go.

Indian Canyon Loop Trail is a 1.54-mile loop in John Day Fossil Beds National Monument in Oregon, managed by the National Park Service. The trail is an out-and-back with a total round-trip distance of about 3.1 miles, and it rises from 1,549 feet to 1,949 feet, a total gain of 566 feet. The climb is rolling, with the steepest stretch at about 0.13 miles from the start, where the grade reaches 8 percent. The most comfortable months for a visit are typically June and September. Typical averages from the nearby Fossil weather station show June highs around 73°F and September highs around 74°F, with July and August highs near 84°F. That station sits about 700 feet higher than the trail, so temperatures on the trail run a little warmer. The trip takes about 1.5 hours. The trail is close to several other routes, including Equisetum Ridge Trail at 0.3 miles, Huntley Trail at 0.4 miles, and Mimulus Trail at 0.8 miles. Hancock Pictograph Trail is about 0.9 miles away.

Local outfitters

Not on Roamze yet. Their page has how to reach them.

Map and trail data © OpenStreetMap contributors