California · Hiking

South Boundary Loop Trail

3.9 mi
loop
1,170 ft
climb
1,883 ft
high point
Loop
route
Oct–May
best months
Loading this week's forecast

South Boundary Loop Trail is a 3.9-mile moderate hike in Pacheco State Park in California, managed by State Park and Recreation. The trail rises from about 1,431 feet to a high point of 1,883 feet, with a total elevation gain of 1,170 feet. The climb is steepest at about 3.6 miles, where the grade reaches 22 percent, and the route also descends to a low of 1,242 feet before returning to the starting point. Spring and fall are the most comfortable times to go. Typical averages from a nearby weather station at San Luis Dam show April highs around 73°F and October highs around 79°F, while July and August average about 93°F. That station sits well below the trail, so temperatures on the route run cooler. The hike takes about two hours. Several other trails start close by, including Spikes Peak Trail about half a mile away and Diamond Lake Trail and Diamond Spring Trail at about 0.6 miles. Pacheco Creek, a canoeing spot, is roughly 8.8 miles away.

Conditions and forecast on Spikes Peak

Daily highs and lows, wind and the chance of precipitation at the summit and route start for the next 7 days, from the Open-Meteo model.

Route details

Distance
3.9 mi
Climbing
About 1,170 ft
Summit
1,935 ft
Difficulty
Moderate
Time
About 2 hours

Other routes up Spikes Peak

Questions about this route

How long is the South Boundary Loop Trail on Spikes Peak?

About 3.9 mi.

How much elevation gain is on the South Boundary Loop Trail?

About 1,170 ft of climbing round trip.

How hard is the South Boundary Loop Trail?

It is rated moderate.

How long does the South Boundary Loop Trail take?

About 2 hours round trip.

How many routes go up Spikes Peak?

4: Diamond Lake Trail, Mountain View Trail, Spikes Peak Trail and South Boundary Loop Trail.

Map and trail data © OpenStreetMap contributors