Washington · Hiking

Bead Lake Trail

6.4 mi
round trip
5,026 ft
climb
3,683 ft
high point
Out and back
route
Apr–Oct
best months

Caution today

Agency alerts are in effect for this area; weather is marginal · USFS, OpenWeather · checked just now

Loading this week's forecast

Is Bead Lake Trail open right now?

Closure in the area

There's a closure order in Colville National Forest. It doesn't name Bead Lake Trail, so check the source for the area it covers.

As of · Source: USFS · Colville National Forest. Agencies don't list every closure — check before you go.

Bead Lake Trail is an out-and-back hike in the Newport Ranger District of Colville National Forest in northeastern Washington, managed by the Forest Service. The trail is rated expert, and the route is about 12.9 miles long, with a total elevation gain of 5,026 feet. The high point is 3,683 feet, and the climb is steady, with the steepest stretch at about 1.4 miles in, where the grade reaches 37 percent. The trail starts at the Bead Lake T.H Trailhead, and the trip is estimated to take about seven hours. The route is long and steep, so plan for a full day on foot. Summer is the most comfortable time to go. Typical averages from a nearby weather station in Newport, which sits about 1,500 feet lower, show July highs around 84°F with lows near 51°F. At the trail's higher elevation, temperatures run cooler. No Name Lake campground is about 1.3 miles away, and the GEOPHYSICAL (ROUGH RIDGE) hike is about 1.7 miles off. Little Sweat Trail, a cross-country ski route, is about 2 miles away, and Mystic Lake campground is about 3.2 miles away.

Local outfitters

Not on Roamze yet. Their page has how to reach them.