Tennessee · Hiking

Furnace Branch Trail

0.9 mi
round trip
699 ft
climb
4,162 ft
high point
Out and back
route
Sep–Oct
best months
Loading this week's forecast

Is Furnace Branch Trail open right now?

Closure in the area

There's a closure order in Cherokee National Forest. It doesn't name Furnace Branch Trail, so check the source for the area it covers (2 listed).

As of · Source: USFS · Cherokee National Forest. Agencies don't list every closure — check before you go.

Furnace Branch Trail is an easy, short hike of about 0.85 miles, with an elevation gain of about 700 feet, set in the Watauga Ranger District of Cherokee National Forest in Tennessee. It is a front-loaded out-and-back, starting at about 3,467 feet and reaching a high point of about 4,162 feet. The steepest stretch comes near the 0.64-mile mark, where the grade reaches about 23 percent. The most comfortable time to go is fall. A nearby weather station records typical averages of around 73°F highs and 54°F lows in September, and October is similar at about 64°F and 44°F. That station sits roughly 800 feet lower than the trail's high point, so temperatures up top run cooler. The hike takes about an hour, and the surrounding area offers more to do. Holston Mountain West Trail, Rye Patch Trail and Low Gap Trail all lie within a mile. For an overnight stay, Little Oak Campground is about 7.6 miles away.

Local outfitters

Not on Roamze yet. Their page has how to reach them.

Map and trail data © OpenStreetMap contributors