Ohio · Hiking

Bridle Trail

0.7 mi
round trip
400 ft
climb
1,029 ft
high point
Out and back
route
Apr–Jun, Aug–Nov
best months
Loading this week's forecast

Bridle Trail is a short out-and-back hike in western Ohio, about half a mile from the community of Antonis. The route is easy and covers less than a mile and a half, with a high point of 1,029 feet and a front-loaded climb that starts steep and then eases. The trail runs from a low point of 838 feet to a high of 1,029, with a total gain of 400 feet for the round trip. The steepest part comes early, at about 0.14 miles, where the grade reaches 21 percent. The whole trip takes about half an hour. Late spring and early fall are the most comfortable times to go. Typical averages from the nearby Waverly weather station put May highs around 75°F and September highs near 80°F, with October cooling to about 68°F. Several other trails sit within a few miles, including Stewart Lake Trail at about 2.5 miles, Hewitt Trail at 3.3 miles and CCC Trail at 3.5 miles.

Conditions and forecast on Mount Pisgah

Daily highs and lows, wind and the chance of precipitation at the summit and route start for the next 7 days, from the Open-Meteo model.

Route details

Distance
0.7 mi round trip
Climbing
About 400 ft
Summit
1,029 ft
Difficulty
Easy
Time
About 0.5 hours

Questions about this route

How long is the Bridle Trail on Mount Pisgah?

About 0.7 mi round trip.

How much elevation gain is on the Bridle Trail?

About 400 ft of climbing round trip.

How hard is the Bridle Trail?

It is rated easy.

How long does the Bridle Trail take?

About 0.5 hours round trip.

Map and trail data © OpenStreetMap contributors