Kentucky · Hiking

Alpine Loop

1.1 mi
loop
253 ft
climb
1,193 ft
high point
Loop
route
Mar–Apr, Jun
best months

Caution at last check

Agency alerts are in effect for this area; weather is good · USFS, OpenWeather · checked 12 h ago

Loading this week's forecast

Is ALPINE LOOP open right now?

Closure in the area

There's a closure order in Daniel Boone National Forest. It doesn't name ALPINE LOOP, so check the source for the area it covers (2 listed).

As of · Source: USFS · Daniel Boone National Forest. Agencies don't list every closure — check before you go.

Alpine Loop is a short, easy loop in Kentucky's Daniel Boone National Forest, within the Stearns Ranger District. The trail is about a mile long, with a total elevation gain of 253 feet and a high point of 1,193 feet. It's a low-commitment outing, and the Forest Service manages the surrounding land. The route is a loop, so you return to your starting point. The climb is steady, and the steepest stretch comes early, around 0.2 miles in, with a grade of about 13 percent. The total loss of 265 feet makes the loop a little more than a mile of gentle up and down. Spring and fall are the most comfortable times to go. Typical averages from a nearby weather station in Somerset show October highs around 71°F with lows near 48°F, and May highs around 77°F. That station sits a few hundred feet lower than the loop's high point, so temperatures on the trail run a little cooler. The Alpine Trail Short #520A starts just 0.2 miles away, and Alpine Trail #520 is about 0.4 miles off. Farther out, the Middle Ridge Trail #518 and the Three Forks of Beaver Loop Trail #512 are both within about 4 miles.