West Virginia · Hiking

Burnside Ridge Trail

3.8 mi
round trip
1,831 ft
climb
3,184 ft
high point
Out and back
route
Aug–Oct
best months

Caution at last check

Agency alerts are in effect for this area; weather is good · USFS, OpenWeather · checked 20 h ago

Loading this week's forecast

Is Burnside Ridge Trail open right now?

Closure in the area

There's a closure order in Monongahela National Forest. It doesn't name Burnside Ridge Trail, so check the source for the area it covers.

As of · Source: USFS · Monongahela National Forest. Agencies don't list every closure — check before you go.

Burnside Ridge Trail is a 7.6-mile out-and-back hike in West Virginia, set within Watoga State Park and the Marlinton Ranger District of Monongahela National Forest. The State Department of Natural Resources manages the land, and the trail's moderate difficulty and steady climb make it a solid choice for a day on foot in this corner of the state. The route starts at about 2,707 feet and climbs to a high point of 3,184 feet, with a total gain of 1,831 feet over the round trip. The steepest stretch comes early, around 0.56 miles in, where the grade reaches 20 percent. That makes the first part of the hike the most demanding, and the trail's steady profile means the climb is spread out rather than concentrated in one section. For comfortable weather, aim for late spring or early fall. Typical averages from a nearby weather station in Buckeye, WV, show May highs around 72°F and September highs around 75°F, with September also seeing the fewest wet days of the year. That station sits well below the trail, so temperatures on the ridge run cooler. The hike takes about 3.5 hours to complete. Jesse's Cove Trail is about 1.7 miles away, and Arrowhead Trail and the Greenbrier River Trail are within about 3 miles. Paddlers can reach the Greenbrier River Water Trail roughly 8.5 miles off.

Map and trail data © OpenStreetMap contributors