Virginia · Hiking

Ridge Access Trail

0.8 mi
round trip
443 ft
climb
1,318 ft
high point
Out and back
route
Mar–Nov
best months
Loading this week's forecast

Is Ridge Access Trail open right now?

Closure in the area

There's a closure order in Shenandoah National Park. It doesn't name Ridge Access Trail, so check the source for the area it covers.

  • Active Closure

    Park closure covering Shenandoah National Park · NPS · Shenandoah National Park

  • Parking at Boundary Access Areas

    Park alert covering Shenandoah National Park · NPS · Shenandoah National Park

As of · Source: NPS · Shenandoah National Park. Agencies don't list every closure — check before you go.

Ridge Access Trail is a short, easy out-and-back hike in Shenandoah National Park in Virginia, managed by the National Park Service. The trail is 1.6 miles long, with a one-way elevation gain of 443 feet, and it rises from about 1,074 feet to a high point of 1,318 feet. The most comfortable months for a visit are typically late spring and early fall. Typical averages from a nearby weather station in Luray show May highs around 74°F and September highs around 78°F, with July the warmest month at about 85°F. The Ridge Trail starts just 0.1 mile away, and Nicholson Hollow Trail and Old Rag Access Trail are both within a mile. Climbers can find the Lower Ridge Trail Slabs about 0.9 mile off.