Utah · Hiking

Sentry Loop Trail

Sentry Loop TrailPhoto: picalele, CC BY 3.0 (via Wikimedia Commons)
1.8 mi
loop
484 ft
climb
5,254 ft
high point
Loop
route
Loading this week's forecast

Sentry Loop Trail is a 1.8-mile loop in Antelope Island State Park in Utah, managed by State Park and Recreation. The trail is rated easy, and it gains about 484 feet of elevation before returning to its starting point, which sits at roughly 5,195 feet. The high point on the loop reaches about 5,254 feet, and the steepest stretch comes at about 1.6 miles, where the grade reaches 16 percent. Late spring and early fall are the most comfortable times to go. Typical averages from a nearby weather station show May highs around 69°F and September highs around 78°F, while July averages climb to about 89°F and winter brings frequent snow days. The trip takes about an hour. The Buffalo Scaffold / West Side Trail is about 0.7 miles away, and the Mountain View Trail, Frary Peak Trail and Frary Interpretive Trail are all within about 4 miles.

Conditions and forecast on The Sentry

Daily highs and lows, wind and the chance of precipitation at the summit and route start for the next 7 days, from the Open-Meteo model.

Route details

Distance
1.8 mi
Climbing
About 484 ft
Summit
5,446 ft
Difficulty
Easy
Time
About 1 hour

Questions about this route

How long is the Sentry Loop Trail on The Sentry?

About 1.8 mi.

How much elevation gain is on the Sentry Loop Trail?

About 484 ft of climbing round trip.

How hard is the Sentry Loop Trail?

It is rated easy.

How long does the Sentry Loop Trail take?

About 1 hour round trip.

Map and trail data © OpenStreetMap contributors