Pennsylvania · Hiking

Hunters Ridge Trail

2.0 mi
round trip
1,225 ft
climb
1,726 ft
high point
Out and back
route
Aug–Sep
best months
Loading this week's forecast

Is Hunters Ridge Trail open right now?

Closure in the area

There's a closure order in Allegheny National Forest. It doesn't name Hunters Ridge Trail, so check the source for the area it covers (3 listed).

As of · Source: USFS · Allegheny National Forest. Agencies don't list every closure — check before you go.

Hunters Ridge Trail is a 4-mile out-and-back hike in Pennsylvania's Chapman State Park, within the Bradford Ranger District of the Allegheny National Forest. The trail starts at about 1,487 feet and climbs to a high point of 1,726 feet, with a total elevation gain of 1,225 feet over the round trip. The steepest stretch comes at about a mile in, where the grade reaches 13 percent. The most comfortable months for a visit are late spring and early fall. Typical averages from a nearby weather station in Warren, PA, run from highs around 70°F in May to about 74°F in September, with July the warmest at 81°F. That station sits roughly 500 feet lower than the trail's high point, so temperatures on the ridge run a little cooler. The hike takes about two hours. Penny Run is the closest neighbor at 1.2 miles, and Tom's Run Trail and Tanbark Trail are both within about 4.5 miles. For an overnight stay, Buckaloons Rec Area is about 7.4 miles away.

Map and trail data © OpenStreetMap contributors